For all of the latest KEI news and to be added to our event invitation mailing list

send an email to:

Keller Electrical Industries hosts Koyo Training Vehicle (KTV).

January 1, 2017

Keller Electrical is pleased to announce the Midpoint Bearing Training Seminar will be held at Keller Electrical on Wednesday, March 1, 2017.
The seminar will be held in the Koyo Training Vehicle (KTV) where you will have access to critical information about proper bearing installation & removal, lubrication, specifying, failure prevention and analysis. Koyo personnel provide hands-on training that’s fun and practical, including an installation bench where students can perfect their skills at mounting and removing bearings.

Click here to download the registration form.

If you are outside the Phoenix area, classes may be available for you or your group to attend.  Please contact LeAndra Marx by phone at (602) 682-2112 or by e-mail: to make arrangements.

Keller Electrical Industries named an Authorized Service & Repair Facility for Polaris Pumps LLC.

July 27, 2015

Keller Electrical Industries, Inc. is excited to announce that we have been named to serve as an authorized repair and service facility for Polaris Pumps LLC in the Southwest United States including Arizona, New Mexico and Nevada.

Polaris Pumps is a manufacturer of State of the Art Submersible Slurry Pumps. Designed to handle the toughest services in a broad spectrum of solids handling and slurry transport applications, Polaris pumps feature a wide selection of wet end configuration options and run dry capable, severe duty submersible motor combinations that enable us to configure a submersible pump solution to meet your specific requirements. The Polaris pump line-up utilizes a modular wet-end platform approach with common wet end components for a given pump size. The final configuration to a plain open suction, mixer or shredder type pump is accomplished by adding kit components that are interchangeable and can be added or changed in the field as necessary. Primarily designed for heavy duty slurry applications, the wet-end components including the strainer are made from abrasion resistant High-Chrome white iron for maximum wear life. CD4MCu duplex stainless steel wet end components are also available for corrosive applications. This enables us to meet the requirements of almost any application ranging from effluent water and waste water disposal, FGD sumps and abrasive slurry transport to food processing waste, wood yard waste and recycling..

To put Polaris Pumps to work for you, contact our Sales department, by phone: 602-437-3015 or by e-mail: to coordinate and schedule service or repair.

Check out the Press Release (.pdf).

Keller Electrical Industries named an Authorized Service & Repair Facility for Dynapower Corporation.

July 20, 2015

Keller Electrical Industries, Inc. is excited to announce that we have been named to serve as an authorized repair and service facility for Dynapower Company LLC.

Dynapower Company is proud to celebrate over 50 years of providing power electronic solutions. Dynapower is a global leader in the design and manufacture of AC and DC power supplies, energy storage systems and custom transformers. Their product scope includes integrated systems from 10 kilowatts to 50 megawatts. Dynapower’s modern 150,000 sq/ft. facility in South Burlington, VT is vertically integrated with the capability to design, manufacture and test complete power systems including transformers of all types. Dynapower’s continued growth over the last 50 years is attributable to a firm commitment to research and development, continuous improvement, and innovative designs. Their products and services include: Industrial Rectifiers, Switchmode Rectifiers, Bi-Directional Inverters, High Power Rectifier Systems, Transformers, Controls, Spare Parts, and Technical Service & Support.

To put Dynapower to work for you, contact our Sales department, by phone: 602-437-3015 or by e-mail: to coordinate and schedule service or repair.

Check out the Press Release (.pdf).

Keller Electrical Industries hosts Motor Bearing Protection Training.

September 10, 2014

Keller Electrical is pleased to announce the AEGIS® Motor Bearing Protection Ring Training Seminar will be held at Keller Electrical on Wednesday, September 10, 2014.

Henry Stimson from AEGIS® will be here to discuss the problems associated with using VFDs to drive electrical motors and the solution provided by the AEGIS® shaft grounding ring.

Along with the presentation, we encourage questions and discussion among the group.

*Earn 1 Professional Development Unit (PDU)*

Click here to download the registration form.

Please RSVP to LeAndra Marx by fax (602) 437-8163 or by e-mail:

KEI in the news:

October 12, 2012

The Arizona Republic

"Hiring event for veterans, spouses in Glendale"


Read more:

For information on careers with KEI please visit our Careers page

Keller Electrical Industries Welcomes Kevin Baker, P.E.

September 26, 2011

PHOENIX, ARIZONA, September 26, 2011 – Keller Electrical Industries, Inc., the southwest’s leading service provider of industrial electrical motor repair services and a manufacturer, integrator and installer of custom industrial motor controls, announced on September 26, 2011, that Kevin Baker joined the Company as a Senior Electrical Engineer.

Kevin has more than 25 years of experience in the manufacturing, repair and distribution environment. He has an extensive background in the electrical industry with hands-on application knowledge of switchgear, motor control center design and manufacturing, automation, programmable logic controls and variable speed drive applications. His professional experience also includes significant experience in the mining sector.

Kevin is a B.A. graduate from the University of Arizona with emphasis in Mathematics, Physics and Engineering. He is registered as a Professional Electrical Engineer in Arizona and Nevada. Kevin spent over twenty-one years at Industrial Motor & Control Inc. last serving as Sr. Application Engineer and most recently he was an Electrical and I&C Engineer for M3 Engineering & Technology Corporation.

Check out the Press Release (.pdf).

Keller Electrical Industries among the 13th Annual ICIC and Fortune Magazine’s Inner City 100 winners.

Annual ranking showcases the 100 fastest-growing inner city businesses in America.

May 31, 2011

PHOENIX, ARIZONA, May 31, 2011 - The Initiative for a Competitive Inner City and Fortune Magazine released the 2011 Inner City 100 list of the fastest-growing inner city companies in the U.S. and Keller Electrical Industries, Phoenix, Arizona ranked in this year’s list. The Inner City 100 program recognizes successful inner city companies and their CEO’s as role models for entrepreneurship, innovative business practices and job creation in America’s urban communities. (Click on the link to see more about the Inner City 100)

The rankings for each company were announced at the Inner City 100 Awards Dinner on Thursday, May 12, 2011 in Boston, MA. Winners attended a two-day event featuring seminars for Inner City 100 owners and managers at Harvard Business School, a procurement symposium and an awards gala that drew more than 500 guests.

The Inner City 100 list provides unmatched original data on the fastest growing inner-city businesses in the U.S. In the last 13 years, 661 different companies have earned positions on the Inner City 100, collectively generating more than $2.2 billion in annual revenues and creating nearly 70,000 new jobs. Chevron Corporation, Staples Foundation and Goldman Sachs are long-time sponsors of the program.

For the 2011 list, a record number of two thousand nominations were received. Winners represent a wide span of geography, operating in 51 cities and 32 states. The 2011 Inner City 100 winners grew at a compound annual growth rate of 39 percent and an average standard growth rate of 379 percent between 2004 and 2009. Collectively, the top 100 inner city businesses employ 6,720 employees and have created more than 3,227 new jobs between 2005 and 2009.

“We are delighted to celebrate businesses like Keller Electrical that are playing a critical role in revitalizing America’s urban communities. Through their achievements, the Inner City 100 winning companies exemplify America’s remarkable potential and the future of our urban centers,” Mary Kay Leonard, ICIC president and CEO. “These extraordinary companies demonstrate the market possibilities that exist within our inner cities and the growth that is at the heart of all urban entrepreneurial successes.”

Check out the Press Release (.pdf).


KEI in the news:

February 28, 2011

The Arizona Republic

"Arizona manufacturing jobs still a path to middle class"

by Jahna Berry

Read more:

Keller Electrical Industries named "Koyo Certified Repair Center."

December 17, 2009

Keller Electrical Industries, Inc. is pleased to announce that we have met the requirements to achieve the status of "Koyo Certified Repair Center."

Below are the fore mentioned requirements:

  • Shop audit results in zero major or minor deficiencies.
  • 90% of technicians pass the bearing proficiency test covering general bearing knowledge with a 85% or better.
  • Koyo bearings are purchased through Midpoint Bearing, Koyo Authorized Distributor.

Koyo Corporation of USA is a major supplier of Bearings to Industrial OEM and Automotive Manufacturers.

Koyo Certified Repair Center plaque

Keller Electrical Industries Announces Project High Voltage - New State of the Art Facility!

August 17, 2009

Don Anderson announced Monday the company's plans for an exciting and bright future: A Brand New State of the Art Facility! The new location features over 105,000 square feet of high tech Motor Repair and Custom Control Manufacturing capabilities which includes over 23,000 square feet of storage and product distribution space. Ground breaking scheduled for September 2009 and completion is expected summer of 2010. Please return to our web site often and check out our High Voltage Progress Page for updates and photos of the construction!

Check out the Press Release (.pdf).